Millipore PTFE 0.2 micron filter on stock

MFMillipore™ membranes without Triton ® surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore™ filters. Nylon membranes and net filters ** are made from the same material but utilize two different processing methods. Due to this difference, nylon net filters possess a uniform, large pore structure (similar to a mesh), a pore size ≥5.0 μm, and a reduced thickness in comparison to nylon membrane filters.

Our Fluoropore ® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency.

Filter Cartridge Type: Membrane Filter Cartridges: Filter Cartridges Series: TefTEC Series: Cartridge End Type: Double Open Ends: Cartridge Length (in) 10 in: Cartridge Diameter (in) 2.7 in: Maximum Flow Rate (gpm) 8 GPM: Maximum Media Operating Temperature: 203°F: Cartridge Material: Polypropylene: Filtration Media: Expanded PTFE Membrane

Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters. Samplicity G2 System has lower ergonomic impact than manual syringe filtration. Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE, Durapore PVDF, Millipore Express PLUS PES, or nylon

The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs. Features

A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. CoQ SLFG05010 10 Price could not be retrieved Recommended Products Overview

Millipore. Sterile Filters. Sterile filtration devices are used to clarify and prevent microbial contamination of cell culture media, cell culture reagents, buffers, biological samples, proteinaceous samples, and more. These devices provide an alternative to autoclaving, which can degrade sensitive, heat-labile biological components.

Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency. Omnipore™ Membrane is hydrophilic PTFE compatible with

1. Airflow values calculated assuming linear relationship between volumetric airflow and differential pressure. 2. Water flows measured after prewetting with alcohol and calculated assuming linear relationship between flow and differential pressure. 3. Bubble points for 0.2µm, 0.45µm, and 3.0µm pore sizes measured using IPA; all others

Filter Membranes. Produced by the precipitation or stretching of polymeric materials, membrane filters are commonly used in both industry and research. Properties of membrane filters vary widely with differences in composition, surface treatments, and pore size. Selecting the ideal filter requires an understanding of basic characteristics.

Emflon PFAW cartridges are high capacity hydrophobic membrane filters designed for reliable reduction of particles and microorganisms in compressed gas and vent applications. The filter element features Pall’s proprietary 0.2 micron polytetrafluoroethylene (PTFE) membrane, pleated to give high area in single open-end cartridges.

Nanosep centrifugal devices with wwPTFE (water wettable PTFE) membranes are available with 0.2 and 0.45 μm pore sizes can be used in rapid microfiltration applications. They are ideal for use in analytical sample preparation or applications that require the use of a universally solvent compatible membrane.

Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also used for vacuum line protection. All units are bi-directional.

Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm. Background Information. Millex® syringe filter units with hydrophobic Fluoropore™ or Millipore Express® PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore™ membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture.