Overview Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane with the versatility of a pure PTFE membrane. Mitex™ membrane is hydrophobic.
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
PTFE filters from Baghouse.com can easily reach sub-micron filtration ranges. In some applications efficiencies are high enough to allow for the recirculation of treated air back into the facility. Use of such “Green Technology” further promotes an environmentally friendly operation, and saves on heating costs.
Membrane Solution’s advanced PTFE membranes (pore size:0.03-5μm) achieve the perfect combination of high flow rate,high retention and cost-effective. Material characteristics of MS®PTFE membrane include small diffusion flow and more pores in any given area. MS®PTFE membrane for filtration including hydrophobic membrane and hydrophilic
Filters are Triton-free and have a bidirectional membrane support and luer lock (15/25 mm dia) or stepped barbs (50 mm dia) inlet/outlet for a secure fit to the syringe. Membrane type and pore size are printed on each filter for easy identification. All Cole-Parmer syringe filters are 100% integrity tested and manufactured in accordance with ISO 9002 standards.
Millex ® hydrophilic PTFE syringe filters feature a polypropylene housing and a PTFE membrane, providing broad chemical compatibility regardless of your application. The table below shows solvents and solutions commonly used with Millex ® hydrophilic PTFE syringe filters – find our complete chemical compatibility list at Figure.
Take advantage of the Tisch Scientific wide variety of membrane filter roll stock at discount prices. We also offer custom laser cutting to your exact specifications for both short and long run orders. Minimize product waste by letting us do the cutting. In addition, we custom packaging and branding for your OEM applications.
Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency. Omnipore™ Membrane is hydrophilic PTFE compatible with
Emflon PFAW cartridges are high capacity hydrophobic membrane filters designed for reliable reduction of particles and microorganisms in compressed gas and vent applications. The filter element features Pall’s proprietary 0.2 micron polytetrafluoroethylene (PTFE) membrane, pleated to give high area in single open-end cartridges.
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
MF-Millipore™ membrane filters are composed of a biologically inert mixture of cellulose acetate and cellulose nitrate. They are available in a variety of diameters and surface configurations to meet a wide range of application needs. MF-Millipore™ membranes have set the standard for analytical and laboratory applications.
The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Request a Quote* * 72 Hours Turnaround Time See more Products below Choose your product Products (33) Filter your product
PTFE Membrane Filters. When sampling in aggressive chemical environments, SKC PTFE Membrane Filters are the versatile choice. The unique properties of PTFE - strength, acid/base/solvent/temperature-resistance, hydrophobicity, low background, and low tare mass - make it ideal for gravimetric, chemical, and/or microscopic analysis of particulates. PTFE Filters are the optimal choice for sampling environmental PM, industrial hygiene sampling of PNAs, metalworking fluids, and more.
Micron Filter Membranes. Request Information. A key sample preparation technique, microfiltration removes micron-range particles or biological entities from fluids by passage through a microporous medium, such as a membrane filter. Merck, with over 50 years of filtration expertise, sets the industry standard for high-performance membrane technology for sample preparation.
GGPTFE-Series High Purity General Grade PTFE Filter Cartridges, with expanded polytetrafluoroethylene (PTFE) membrane, provide superior chemical resistance for a broad range of industrial applications. With retention ratings as fine as 0.1μ (100 nanometers), consistent contaminant removal is achieved in aggressive fluids and organic solvents.
