Porex PTFE membrane filter for solvents

This PTFE membrane is a good choice for use with aggresive organic solvents Waters offers scientists and lab managers Solvent Filter, PTFE, 47 mm, Non polar,

POREX® PTFE MEMBRANE STANDARD SIZES Porex PTFE Product- General/ Industrial Pore Size Thickness (In) Thickness (MM) Spec Sheet *PM6M 5 0.004 0.1 *PM22S 6-10 0.01 0.25 *PM15M 10 0.007 0.178 *PM21M 12-16 0.005 0.13 *PM21ML 12-16

Description of PTFE Membrane Filters PTFE membrane filter is made of polytetrafluoroethylene ultrafine fibers by hot-melt bonding together. Difference from glass fiber membrane, PTFE filter is a kind of membrane material for deep filtration.Membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene.

POREX Filtration Modules provide consistent, reliable solid/liquid separations and long service life Sintered PE substrate with PVDF membrane offers high-performance tubular membranes with superior operating characteristics

Die cut polypropylene membrane filters offer high temperature stability, high chemical resistance, and low extractable levels. They are an excellent choice for filtering aggressive solvents and provide a cost-effective alternative to die cut PTFE membrane

The membrane is laminated onto a nonwoven polypropylene support web for improved strength and handling and can be used at temperatures up to 120ºC. Chemically stable and inert PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes.

This newest advancement in the Porex TMF filter technology line is a specially formulated high flux 20nm rated tubular membrane. It was designed to remove virtually all the cuttings and particulate load, including the very fine colloidal particulate found in semiconductor water streams. Porex 20nm membranes incorporate the same robust membrane

Description Hydrophobic filter made of polytetra-fluorethylene laminated with PP layer Chemical resistant (pH 1-14), used also for solvents and acids Due to their hydrophobic characteristics, they must be pre-wetted with ethanol or methanol before filtration of

29th Feb, 2016. Ashutosh Kumar. Justus-Liebig-Universität Gießen. Dear Kay Wong, I will not suggest you to filter your LC-MS solvent or HPLC grade water. Filter may be washed out with organic

27/5/2020 · Porex and Oxyphen offer PFOA-free membranes. The Porex Virtek PTFE helps provide sufficient airflow while protecting devices from dust and moisture. To address ongoing concerns around potentially harmful perfluorooctanoic acid (PFOA) and PFOA-related compounds, Porex, a specialist in porous polymer solutions, is offering Virtek PTFE, a 100% pure

Protection vents and filters from Porex help renewable energy systems run more reliably. Our vents repel water, dust and dirt, and allows the device to breathe during heating and cooling cycles. Our filters can be customized to filter fluid or air, depending on the application.

Available in sheets (PE) or rolls (PE and PTFE). POREX PTFE or. PE Protein Precipitation Membranes help remove contaminating lipids, salts and proteins from samples prior to LC-MS/MS and increases efficiency through elimination of time-consuming centrifugation and transfer steps. Ideal for

Both Fluoropore hydrophobic PTFE and Mitex hydrophobic PTFE membranes can be used for filtering organic solvents and gases. Fluoropore™ membranes and PTFE

Description of Polypropylene Membrane Filter Microporous membrane filter 0.45 μm is made of polypropylene ultrafine fibers by hot melt bonding, which is a kind of membrane material for deep filtration. As a polypropylene membrane filter suppliers, the pp membrane is made of food-grade isotactic polypropylene, without any additives in the whole production process.