English
English 中文
Your Position :
Home » News » PTFE Syringe Filter » polypropylene housing PTFE syringe filter for venting
   

polypropylene housing PTFE syringe filter for venting

Whatman Puradisc 25 mm PTFE Syringe Filters PTFE Syringe Filters. The specifications in the Technical Data: Puradisc 25 mm PTFE Syringe Filters, on page 1 are intended to provide the basis for esta...
Products name 10-20mL 18mm Screw Thread Headspace ND18
Dimension 18mm
Cap Color Silver
Septa details White, Red, Blue, 1.3-1.6mm thickness.
Material Aluminum for Cap, PTFE/Silicone for Septa
Package 100pcs/Pack
Cap type Open top
Septa type Non-slit
The Main Parameter

Whatman Puradisc 25 mm PTFE Syringe Filters

PTFE Syringe Filters. The specifications in the Technical Data: Puradisc 25 mm PTFE Syringe Filters, on page 1 are intended to provide the basis for establishing functional use, as well as setting quality assurance test performance levels. • Hydrophobic PTFE membrane • Solvent Resistant Membrane • Polypropylene Housing • Rugged Construction

Vent Filters | GVS

GVS Vent Filters are available with connectors 6-12 mm and are individually packaged either sterile or non-sterile. These devices are available with PTFE membranes, Polypropylene housing, and 0.20µm or 0.45µm pore size.

palstic 0.45um ptfe syringe filter for venting-PTFE Membrane

Polytetrafluoroethylene PTFE Syringe Filters, 0.45um, 4mm. PTFE Syringe Filters, 0.22 um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100 per pack TSH-SPEC16251 $143.99 Ideal for laboratory small volume samples clarification and particles removal.Features and Benefits Easy to use Wide range of filter media Applicable to samples below 80mL

Minisart® with PP Housing

Minisart® syringe filters optimized for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with

Corning® 50 mm Diameter Syringe Filters, 0.2 µm Pore PTFE

These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance These naturally hydrophobic membranes can be used for venting applications or filtering gases 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards

PTFE H Certified FinaPrep Syringe Filter with Polypropylene

PTFE H Certified FinaPrep Syringe Filter with Polypropylene Housing In order to enhance the hydrophilicity and anti-fouling property of polytetrafluoroethylene (PTFE) flat microfiltration membrane, the PTFE flat membrane is modified via chemical cross-linking.

Eastman Scientifics Syringe Filters, PTFE membrane, 0.22µm

Description. Disposable, in-line Eastman Scientifics syringe filters (25mm in diameter) Polytetrafluoroethylene (PTFE) membrane in polypropylene housing are ideal for ideal for sterilization of gas and alcohols; cleaning acids, alkalies, and organic solvents; venting purposes.

Acrodisc® Syringe Filters with PTFE Membrane

25 mm Acrodisc PSF syringe filter is available in robotic-compatible AutoPack™ packaging for SOTAX AT-70 SMART* and CTS and Zymark TPW*, APW*, and MultiDoses dissolution systems. *Registered trademark Specifications Materials of Construction Filter Media: Hydrophobic PTFE membrane on a polypropylene support Housing: Polypropylene

Sterile Syringe Filters with PTFE Hydrophobic Membrane has

CellTreat Syringe Filter PTFE 30mm Diameter, .45um Membrane with Polypropylene Housing, RNase and DNase Free, STERILE, 30/PK CT229759 Now: $99.00 $89.00

Syringe Filter, 0.45 um Pore Size, PTFE Filter Material

Syringe Filter, 0.45 um Pore Size, PTFE Filter Material, Polypropylene Housing Material, PK 50 Item # 792XN5 Mfr. Model # SF-PTFE-4513-S

Acro® 50 Vent Devices with PTFE Membrane - Thomas Sci

Reusable and autoclavable PTFE membrane and polypropylene housing have broad chemical resistance Large surface area provides greater throughput and high air flow rate Available with a variety of inlet

CHMLAB GROUP - Venting Syringe Filter

Venting Syringe Filter. CHM® SVT venting syringe filters are reusable units that contain a reinforced PTFE membrane with polypropylene gauze, in a polypropylene housing. These units are easily connected to fermenters or containers. They can work at high pressure.

PTFE Syringe and Vent Filters - Sterlitech

For samples composed of acids and bases, hydrophilic PTFE membrane syringe filters and PES membrane syringe filters may be considered. For samples composed of nonaqueous solvents that are not compatible with nylon, PTFE membrane syringe filters and polypropylene membrane syringe filters may be considered.

Whatman 6713-1075, PolyVENT 1000, 0.2 µm, inlet 3/8 to 1/2

PolyVENT are integral Filter products for sterile venting of vessels and tanks. These devices are constructed from a single, standardized set of materials PTFE membranes and polypropylene housing to simplify the approval process. Features: Pass the HIMA challenge test for sterilizing grade.

Nalgene™ Vent Filters and 50mm Capsules

Catalog number: DS0222-0045. Nalgene™ 50mm inline filter with PTFE membrane provides an excellent barrier for sterile venting of benchtop fermentors, in-line gas filtration, or protecting vacuum pumps from moisture. It also gives the ability to filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC.

Related products
Tray height drift is the first thing to measure, not the last
Tray height drift is the first thing to measure, not the last

A practical troubleshooting & field fixes for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
Sort every filter change into one of three buckets before you touch a method
Sort every filter change into one of three buckets before you touch a method

A practical method & compliance for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
Start from the puncture budget, not the pore size
Start from the puncture budget, not the pore size

A practical selection & buying guide for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
Start with the release specification, not the ISO certificate
Start with the release specification, not the ISO certificate

A practical procurement & wholesale for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
Pick the AQL by defect class, not by product family
Pick the AQL by defect class, not by product family

A practical manufacturing & oem quality for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
The freight line hides more than the carrier’s rate
The freight line hides more than the carrier’s rate

A practical procurement & wholesale for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
The paste extrusion line controls stretch ratio, not thickness
The paste extrusion line controls stretch ratio, not thickness

A practical manufacturing & oem quality for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
PTFE coring is a punch press operation, not a chemical reaction
PTFE coring is a punch press operation, not a chemical reaction

A practical troubleshooting & field fixes for ptfe membrane filter, written from 15 years of lab consumables operations.

Get More
Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country :
*Email:
Mobile:
*Inquiry:
Quick Consultation
Name:
Email:
                           Whatsapp/Tel:                            
Message:
Copyright 2021 Zhejiang Aijiren Technology, Inc. All Rights Reserved.